IDES Prospector Already have an account? Login Here

IDES

Radel® RG-5010

Polyphenylsulfone

Glass Fiber Reinforcement, 10%

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Radel® RG-5010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Radel RG-5010 is a 10% glass-fiber reinforced polyphenylsulfone (PPSU). Compared to unreinforced polyphenylsulfone, this grade has increased strength, stiffness and creep resistance. This resin is particularly well suited for applications where excellent durability after long-term heat, hot water, or steam exposure is required.

  • Blue: Radel RG-5010 BU 323
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Acid Resistant
  • Autoclave Sterilizable
  • Base Resistant
  • Biocompatible
  • E-beam Sterilizable
  • Ethylene Oxide Sterilizable
  • Flame Retardant
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Sterilizability
  • Good Thermal Stability
  • Good Toughness
  • Heat Sterilizable
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
  • Hydrolytically Stable
  • Radiation (Gamma) Resistant
  • Radiation Sterilizable
  • Radiotranslucent
  • Steam Resistant
  • Steam Sterilizable
Uses 
  • Dental Applications
  • Hospital Goods
  • Medical Appliances
  • Medical/Healthcare Applications
  • Surgical Instruments
Agency Ratings 
 
RoHS Compliance 
Appearance 
  • Blue
  • Opaque
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Machining
  • Profile Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (365°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
     ASTM D570
24 hr
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.125 in, Injection Molded)
psi
 ASTM D638
Tensile Strength (0.125 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Break, 0.125 in, Injection Molded)
%
 ASTM D638
Flexural Modulus (0.125 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.125 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed, 0.125 in)
°F
 ASTM D648
Glass Transition Temperature 2
°F
 DSC
CLTE
     ASTM D696
Flow: 0.125 in
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (0.125 in)
ohm·cm
 ASTM D257
Dielectric Strength (0.125 in)
V/mil
 ASTM D149
Dielectric Constant (0.125 in, 1 MHz)
 
 ASTM D150
Dissipation Factor (0.125 in, 1 MHz)
 
 ASTM D150
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radel® RG-5010, Radel RG5010, Radel® , Radel, RadelRG5010, RG, RG-5010, RG5010, RG:5010, RG/5010, RG+5010, RG_5010, RG 5010, Polyphenylsulfone, PPSU, Polysulfone, PSU, Solvay Specialty, 5010RG
Features
Features may also be described by the following terms: Good Thermal Stability, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Heat Resistance, Steam Sterilization, Steam Sterilizable, Good Toughness, Tough, Good Starilizability, Sterilizable, Heat Sterilizable, Autoclave Sterilization, Autoclave Sterilizable, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (2).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Screw Compression Ratio
 
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Notes
1Typical properties: these are not to be construed as specifications.
2Heating rate of 36°F (20°C) per minute.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.