IDES Prospector Already have an account? Login Here

IDES

AT 416

Low Density Polyethylene

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for AT 416 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A low density polyethylene resin well suited for extrusion coating and lamination applications such as envelope stock and thin paper coatings. This resin has excellent adhesion and high line speed capability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Adhesion
Uses 
  • Coating Applications
  • Laminates
  • Paper Coatings
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Minimum Coating Thickness: 5 µm (3 lb/ream)
Maximum Line Speed: 1500 ft/min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AT 416, AT , AT416, 416, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Celanese EVA, PolyethyleneLowDensity
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Paper Coatings, Paper Coating.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.