IDES Prospector Already have an account? Login Here

IDES

AT 7110

Low Density Polyethylene

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for AT 7110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AT® 7110 is a low density polyethylene (LDPE) homopolymer. This polymer complies with the requirements of USP PLASTIC Class VI with regard to biocompatibility and CFR 21 177.1520 of the Food and Drug Administration (FDA) subject to extraction limitations for specific end use applications. This polymer may be processed using conventional polymer processing equipments including extrusion, injection molding, thermoforming, blown film and blow filled seal (BFS) processes. AT® 7110 is used as packaging material for food, nutrient and pharmaceutical ingredients, as well as in applications involving devices and implants.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • High Strength
  
Uses 
  • Blown Containers
  • Containers
  • Medical Packaging
  • Medical/Healthcare Applications
  • Vials
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - 1% Secant
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Additional Information
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 ProcC Mod.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AT 7110, AT , AT7110, 7110, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Celanese EVA, PolyethyleneLowDensity
Features
Features may also be described by the following terms: High Strength.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container, Medical Applications, Medical Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): USP (1), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.