Ateva 1081G Celanese EVA Ethylene Vinyl Acetate Copolymer

Product Description

This resin has been designed for medical packaging and manufactured to comply with USP class VI.

General

Material Status

Availability

Features

Uses

Agency Ratings

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Vinyl Acetate Content		wt%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus - 1% Secant		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A
Shore D
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Melting Temperature		°F	DSC
Additional Information
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1081G, Ateva 1081G, Ateva® , Ateva, Ateva1081G, 1081 G, 1081G, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer, G1081
Uses
Uses may also be described by the following terms: Medical Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): USP (1), FDA (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Type IV, 2.0 in/min

Ateva® 1081G