IDES Prospector Already have an account? Login Here

IDES

Ateva® 1645

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1645 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This resin is specifically designed for extrusion coating, coextrusion and specialty lamination applications where superior optical properties are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • High Flow
  • Opticals
 
Uses 
  • Coating Applications
  • Laminates
 
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion Coating
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Vinyl Acetate Content
wt%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Melting Temperature
°F
DSC
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
ASTM D2457
Haze
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1645, Ateva 1645, Ateva® , Ateva, Ateva1645, 1645, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.