IDES Prospector Already have an account? Login Here

IDES

Ateva® 1807V

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1807V is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This resin is suitable for film extrusion and coextrusion with other polymers where superior strength and good heat seal characteristics are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Good Heat Seal
  • Good Strength
Uses 
  • Film
  • Packaging
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D882
MD: Yield, 5.1 mil, Blown Film
psi
  
TD: Yield, 5.1 mil, Blown Film
psi
  
MD: Break, 5.1 mil, Blown Film
psi
  
TD: Break, 5.1 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 5.1 mil, Blown Film
%
  
TD: Break, 5.1 mil, Blown Film
%
  
Dart Drop Impact (5.1 mil, Blown Film)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 5.12 mil, Blown Film)
 
 ASTM D2457
Haze (5.12 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1807V, Ateva 1807V, Ateva® , Ateva, Ateva1807V, 1807 V, 1807V, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer, V1807
Features
Features may also be described by the following terms: Good Strength, Good Heat Seal.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.