IDES Prospector Already have an account? Login Here

IDES

Ateva® 1985A

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1985A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This resin is suitable for use in hot melt glue stick adhesive applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  
Uses 
  • Adhesives
  • Sealants
  
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (125°C/0.325 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - 1% Secant
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Additional Information
Ring and Ball Softening Point: 87°C
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1985A, Ateva 1985A, Ateva® , Ateva, Ateva1985A, 1985 A, 1985A, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer, A1985
Uses
Uses may also be described by the following terms: Sanitary Products.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.