IDES Prospector Already have an account? Login Here

IDES

Ateva® 605A

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 605A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A low melt index EVA copolymer resin designed for extrusion and blow moulding applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Low Flow
Uses 
  • Blow Molding Applications
  • Heavy-duty Bags
  • Packaging
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Vinyl Acetate Content
wt%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Films
Nominal Value
Unit
Test Method
Secant Modulus
    ASTM D882
1% Secant, MD: 2.6 mil
psi
 
1% Secant, TD: 2.6 mil
psi
 
Tensile Strength 3
    ASTM D882A
MD: Yield, 2.6 mil
psi
 
TD: Yield, 2.6 mil
psi
 
MD: Break, 2.6 mil
psi
 
TD: Break, 2.6 mil
psi
 
Tensile Elongation 3
    ASTM D882A
MD: Break, 2.6 mil
%
 
TD: Break, 2.6 mil
%
 
Dart Drop Impact 4 (0.98 mil)
g
ASTM D1709
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
    ASTM D2240
Shore A
 
 
Shore D
 
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 2.56 mil)
 
ASTM D2457
Haze (2.56 mil)
%
ASTM D1003
Additional Information
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 605A, Ateva 605A, Ateva® , Ateva, Ateva605A, 605 A, 605A, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer, A605
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
320 in/min
4F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.