IDES Prospector Already have an account? Login Here

IDES

NORYL PPX* PPX615 Resin

Polyphenylene Ether + PS + PP

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for NORYL PPX* PPX615 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Good chemical resistance. Designed for a balance of stiffness and practical impact strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Impact Resistance
  • Good Stiffness
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 4
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 5
psi
 ASTM D790
-- 6
psi
 ISO 178
Flexural Strength
      
-- 6, 7
psi
 ISO 178
Yield, 1.97 in Span 5
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength 8
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
-22°F 9
ft·lb/in²
 ISO 180/1U
73°F 9
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 11, ISO 306/B50 11
--
°F
 ISO 306/B120
CLTE
     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL PPX* PPX615 Resin, NORYL PPX PPX615 Resin, NORYL PPX* , NORYL PPX, NORYLPPXPPX615Resin, NORYLPPX, PPX 615 Resin, PPX615 Resin, PPX615, 615Resin, PPX615Resin, Polyphenylene Ether + PS + PP, Polyphenylene Ether PS PP, Polyphenylene Ether : PS : PP, Polyphenylene Ether / PS / PP, Polyphenylene Ether - PS - PP, Polyphenylene Ether _ PS _ PP, Polyphenylene Ether PS PP, PPE+PS+PP, PPEPSPP, PPE:PS:PP, PPE/PS/PP, PPE-PS-PP, PPE_PS_PP, PPE PS PP, Polyphenylene Ether, PPE, SABIC IP, PolyphenyleneEtherPSPP, PolyphenyleneEther, PolyphenyleneEther_PS_PP, 615PPX
Features
Features may also be described by the following terms: Good Impact Resistance, Good Stiffness, Good Chemical Resistance, Chemical Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.20 in/min
4Type I, 0.20 in/min
50.051 in/min
60.079 in/min
7Yield
880*10*4 sp=62mm
980*10*4
1080*10*4 mm
11Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.