IDES Prospector Already have an account? Login Here

IDES

TECHNYL STAR™ S 52X1 MV50

Polyamide

Glass Fiber Reinforcement

Supplied by Rhodia Engineering Plastics SA

The technical datasheet with complete property values for TECHNYL STAR™ S 52X1 MV50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Flame retardant TECHNYL STAR polyamide reinforced with glass fibre, for injection moulding.
This phosphorus and halogen free flame retardant grade is especially suitable in electrical sector and electrical household appliances.
This grade is available in light grey colour RAL 7035.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Flame Retardant
  • Halogen Free
  • Low (to None) Phosphorus Content
Uses 
  • Appliances
  • Electrical/Electronic Applications
  
Appearance 
  • Light Grey
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A
Tensile Stress (Break)
psi
 ISO 527-2/1A
Tensile Strain (Break)
%
 ISO 527-2/1A
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Additional Information
Molding Shrinkage Isotropy, RHODIA-EP: 0.01
Glow Wire Flammability Index, IEC 60695-2-12, 1.6mm: 960 °C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL STAR™ S 52X1 MV50, TECHNYL STAR S 52X1 MV50, TECHNYL STAR™ , TECHNYL STAR, TECHNYLSTARS52X1MV50, TECHNYLSTAR, S 52 X 1 MV 50, S 52X1 MV50, S52, 52X, X1, 1MV, MV50, S52X1MV50, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Rhodia, PolyamideUnspecified, NylonUnspecified, 52S
Features
Features may also be described by the following terms: Low Phosphorus Content, Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.