TECHNYL STAR™ S 60G1 V30 Rhodia Polyamide 6 (Glass Fiber Reinforcement, 30%)

Product Description

Flame retardant Technyl Star Polyamide reinforced with 30% of glass fibre, for injection moulding.

This Red Phosphorous and Halogen free flame retardant grade, based on high fluidity Technyl Star, combines excellent all-round mechanical properties with outstanding flame retardancy and electrical performance. It is extremely well suited for the appliance market where GWIT 775°C is required.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Flame Retardant

Features

Flame Retardant

Halogen Free

High Flow

Low (to None) Phosphorus Content

Uses

Appliances

Appearance

Black

Colors Available

Grey

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Part Marking Code (ISO 11469)

>PA6-GF30 FR(40)<

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2/1A
Tensile Stress (Break)			psi	ISO 527-2/1A
Tensile Strain (Break)			%	ISO 527-2/1A
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength			ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength			ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength			ft·lb/in²	ISO 180/1U
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/Af
Melting Temperature (DSC)		--	°F	ISO 3146
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohm	IEC 60093
Relative Permittivity				IEC 60250
Dissipation Factor	--			IEC 60250
Comparative Tracking Index (Solution A)		--	V	IEC 60112
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0315 in		--
0.0630 in		--
0.126 in		--
Glow Wire Flammability Index				IEC 60695-2-12
0.0315 in		--	°F
0.0630 in		--	°F
0.126 in		--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.0315 in		--	°F
0.0630 in		--	°F
Oxygen Index		--	%	ISO 4589-2
Additional Information
Dry	The value listed as Melting Temperature (DSC), ISO 3146, was tested in accordance with ISO 11357. Molding Shrinkage, Rhodia Method, Isotropy: 0.57 Molding Shrinkage, Rhodia Method, Normal/Perpendicular: 0.7% Molding Shrinkage, Rhodia Method, Parallel: 0.4%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL STAR™ S 60G1 V30, TECHNYL STAR S 60G1 V30, TECHNYL STAR™ , TECHNYL STAR, TECHNYLSTARS60G1V30, TECHNYLSTAR, S 60 G 1 V 30, S 60G1 V30, S60, 60G, G1, 1V, V30, S60G1V30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, 60S
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Low Phosphorus Content, High Flow, High Melt, High MFI.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL STAR™ S 60G1 V30, TECHNYL STAR S 60G1 V30, TECHNYL STAR™ , TECHNYL STAR, TECHNYLSTARS60G1V30, TECHNYLSTAR, S 60 G 1 V 30, S 60G1 V30, S60, 60G, G1, 1V, V30, S60G1V30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, 60S

Injection	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL STAR™ S 60G1 V30

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Rhodia Engineering Plastics SA