TECHNYL® A 218 MZ15 V25 BLACK 31N Rhodia Polyamide 66 (Glass Fiber Reinforcement, 25%; Mineral Filler, 15%)

Product Description

Polyamide 66, reinforced with 25% of glass fibre and 15% of mineral filler, heat stabilized, for injection moulding.

TECHNYL® A 218 MZ15 V25 BLACK 31N is recommended in all industrial parts, offering a good combination between thermal and mechanical properties.
This grade is commonly used in the automotive industry to mould large parts with a low warpage, such as:

Rocker cover, engine covers.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 25% Filler by Weight

Mineral Filler, 15% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Low Warpage

Uses

Automotive Applications

Industrial Applications

Automotive Specifications

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Part Marking Code (ISO 11469)

>PA66-(MD+GF)40<

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage - Across Flow		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A
Tensile Stress (Break)		psi	ISO 527-2/1A
Tensile Strain (Break)		%	ISO 527-2/1A
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/Af
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
The value listed as Melting Temperature (DSC), ISO 3146, was tested in accordance with ISO 11357. Molding Shrinkage, Rhodia Method, Isotropy: 0.65 Molding Shrinkage, Rhodia Method, Normal/Perpendicular: 1.01% Molding Shrinkage, Rhodia Method, Parallel: 0.66%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 218 MZ15 V25 BLACK 31N, TECHNYL A 218 MZ15 V25 BLACK 31N, TECHNYL® A , TECHNYL A, TECHNYLA218MZ15V25BLACK31N, TECHNYLA, A 218 MZ 15 V 25 BLACK 31 N, A218 MZ15 V25 BLACK 31N, A218, 218 MZ 15 V 25 BLACK 31 N, A218MZ15V25BLACK31N, 218 MZ15 V25 BLACK 31N, 218MZ, MZ15, 15V, V25, 25BLACK, BLACK31, 31N, 218MZ15V25BLACK31N, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, MZ218, 218A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL® A 218 MZ15 V25 BLACK 31N

Polyamide 66

Glass Fiber Reinforcement, 25%; Mineral Filler, 15%

Supplied by Rhodia Engineering Plastics SA