TECHNYL A 202F Rhodia Polyamide 66

Product Description

Unreinforced polyamide 66, high fluidity, fast cycling grade, with excellent level of white index, for injection moulding.

TECHNYL® A 202F offers two main advantages: excellent filling qualities and UL 94 V2.
It is particularly designed to meet the requirements of the cable ties application in terms of moulding performance, mechanical properties and excellent level of white index.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Features

Fast Molding Cycle

High Flow

Appearance

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Part Marking Code (ISO 11469)

>PA66<

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2/1A
Tensile Stress				ISO 527-2/1A
Yield			psi
Break			psi
Tensile Strain				ISO 527-2/1A
Yield			%
Break			%
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/Af
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE - Transverse (73 to 185°F)		--	in/in/°F	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Relative Permittivity				IEC 60250
Dissipation Factor				IEC 60250
Comparative Tracking Index				IEC 60112
Solution A			V
Solution B		--	V
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0315 in		--
0.0630 in		--
Glow Wire Flammability Index (0.0630 in)		--	°F	IEC 60695-2-12
Oxygen Index		--	%	ISO 4589-2
Additional Information
Dry	The value listed as Melting Temperature (DSC), ISO 3146, was tested in accordance with ISO 11357. Molding Shrinkage, Rhodia Method, Normal/Perpendicular: 1.9% Molding Shrinkage, Rhodia Method, Parallel: 1.9%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 202F, TECHNYL A 202F, TECHNYL® A , TECHNYL A, TECHNYLA202F, TECHNYLA, A 202 F, A202F, A202, 202 F, 202F, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, F202, 202A
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: High Flow, High Melt, High MFI, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 202F, TECHNYL A 202F, TECHNYL® A , TECHNYL A, TECHNYLA202F, TECHNYLA, A 202 F, A202F, A202, 202 F, 202F, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, F202, 202A

Injection	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL® A 202F

Polyamide 66

Supplied by Rhodia Engineering Plastics SA