TECHNYL® A 217 NATURAL P Rhodia Polyamide 66

Product Description

Unreinforced polyamide 66, heat stabilized, medium viscosity, for injection moulding.
TECHNYL® A 217 offers all of the primary properties of unreinforced polyamide 66. In addition, it has improved resistance to high temperature, and can be used for components which will withstand long-term temperature stresses, such as:

Automotive industry: diagnostic plugs,

Electrical industry: connectors.

This product is available in natural and black, and in a wide range of colours.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

South America

Additive

Heat Stabilizer

Features

Heat Stabilized

High Heat Resistance

Medium Viscosity

Uses

Automotive Applications

Connectors

Electrical/Electronic Applications

Appearance

Black

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183/A
Molding Shrinkage - Flow		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2/1A
Tensile Stress				ISO 527-2/1A
Yield			psi
Break			psi
Tensile Strain				ISO 527-2/1A
Yield			%
Break			%
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
Notched Izod Impact Strength			ft·lb/in²	ISO 180/1A
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE - Transverse (73 to 185°F)		--	in/in/°F	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohm	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Relative Permittivity				IEC 60250
Dissipation Factor				IEC 60250
Comparative Tracking Index				IEC 60112
Solution A			V
Solution B		--	V
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Oxygen Index		--	%	ISO 4589-2
Additional Information
Dry	Fire and Smoke F Index, NF F 16 101: 2 I2,F3 Glow Wire Flammability Index, IEC 60695-2-12, 1.6mm: 650 °C
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 217 NATURAL P, TECHNYL A 217 NATURAL P, TECHNYL® A , TECHNYL A, TECHNYLA217NATURALP, TECHNYLA, A 217 NATURAL P, A217 NATURAL P, A217, A217NATURALP, 217 NATURAL P, 217NATURAL, NATURALP, 217NATURALP, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, NATURAL217, 217A
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Medium Viscosity, High Heat Resistance, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Dry	Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 217 NATURAL P, TECHNYL A 217 NATURAL P, TECHNYL® A , TECHNYL A, TECHNYLA217NATURALP, TECHNYLA, A 217 NATURAL P, A217 NATURAL P, A217, A217NATURALP, 217 NATURAL P, 217NATURAL, NATURALP, 217NATURALP, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, NATURAL217, 217A

Injection	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL® A 217 NATURAL P

Polyamide 66

Supplied by Rhodia Engineering Plastics SA