IDES Prospector Already have an account? Login Here

IDES

Edgetek™ PC-15CF/000 FCR

Polycarbonate

Carbon Fiber Reinforcement, 15%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Edgetek™ PC-15CF/000 FCR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The Edgetek™ Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 15% Filler by Weight
Features 
  • Fast Molding Cycle
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Annealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Edgetek™ PC-15CF/000 FCR, Edgetek PC15CF000 FCR, Edgetek™ , Edgetek, EdgetekPC15CF000FCR, PC, PC 15 CF 000 FCR, PC-15CF/000 FCR, PC15CF000 FCR, PC-15CF:000 FCR, PC-15CF+000 FCR, PC-15CF-000 FCR, PC-15CF_000 FCR, PC-15CF 000 FCR, PC:15CF/000 FCR, PC/15CF/000 FCR, PC+15CF/000 FCR, PC_15CF/000 FCR, PC 15CF/000 FCR, PC15, 15CF, CF000, 000FCR, PC15CF000FCR, PC15CF_000 FCR, PC15CF 000 FCR, PC_15CF000 FCR, PC 15CF000 FCR, PC15CF_000FCR, PC_15CF000FCR, Polycarbonate, PolyOne, 15PC
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.