IDES Prospector Already have an account? Login Here

IDES

Geon™ Vinyl Packaging 2710 CLR 9500

Rigid Polyvinyl Chloride

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Vinyl Packaging 2710 CLR 9500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The formula has a green blue tint
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • High Flow
  • High Gloss
  • High Impact Resistance
  
Uses 
  • Cosmetics
  • Medical Packaging
  
Agency Ratings 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ASTM D1505
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
 ASTM D648
Optical
Nominal Value
Unit
Test Method
Transmittance
     Internal Method
30.0 mil, 400 nm
%
  
30.0 mil, 700 nm
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Packaging 2710 CLR 9500, Geon Vinyl Packaging 2710 CLR 9500, Geon™ Vinyl Packaging , Geon Vinyl Packaging, GeonVinylPackaging2710CLR9500, GeonVinylPackaging, Packaging 2710 CLR 9500, Packaging2710 CLR 9500, Packaging2710, Packaging, Packaging2710CLR9500, 2710 CLR 9500, 2710CLR, CLR9500, 2710CLR9500, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, CLR2710, 2710Packaging
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Gloss, High Impact Resistance.
Uses
Uses may also be described by the following terms: Medical Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.