IDES Prospector Already have an account? Login Here

IDES

Maxxam™ PPH-20C Nat

Polypropylene Homopolymer

Calcium Carbonate Filler; Unspecified Filler\Reinfor., 20%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Maxxam™ PPH-20C Nat is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium carbonate, glass and talc to provide a desired balance of properties including stiffness, durability, impact resistance and heat resistance. Custom grades are available with features such as UV stabilizers, heat stabilizers, custom color, high impact, etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Calcium Carbonate Filler
  • Unspecified Filler\Reinfor., 20% Filler by Weight
  
Features 
  • General Purpose
  • Homopolymer
  
Uses 
  • Automotive Applications
  • Construction Applications
  • Consumer Applications
  • General Purpose
  • Industrial Applications
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
 ASTM D256A
Unnotched Izod Impact 3 (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.125 in)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in, ALL)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Maxxam™ PPH-20C Nat, Maxxam PPH20C Nat, Maxxam™ , Maxxam, MaxxamPPH20CNat, PPH, PPH 20 C Nat, PPH-20C Nat, PPH20C Nat, PPH:20C Nat, PPH/20C Nat, PPH+20C Nat, PPH_20C Nat, PPH 20C Nat, PPH20, 20C, CNat, PPH20CNat, PPH_20CNat, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolyOne, PolypropyleneHomopolymer, PPHomopolymer, 20PPH
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
3Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.