IDES Prospector Already have an account? Login Here

IDES

Escor™ AT 320 Blown

Ethylene Methyl Acrylate Acrylic Acid Terpolymer Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Escor™ AT 320 Blown is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ESCOR AT 320 provides excellent adhesion to a variety of substrates and other film components, such as aluminum foil, polyolefins, polycarbonate, PET, etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Acrylic Acid Content
wt%
 ExxonMobil Method
Methyl Acrylate Content
wt%
 ExxonMobil Method
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Escor™ AT 320 Blown, Escor AT 320 Blown, Escor™ , Escor, EscorAT320Blown, AT 320 Blown, AT320, 320Blown, AT320Blown, Ethylene Methyl Acrylate Acrylic Acid, EMAAA, Thermoplastic Elastomer, TPE, ExxonMobil, EthyleneMethylAcrylateAcrylicAcid, ThermoplasticElastomer, 320AT
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.