IDES Prospector Already have an account? Login Here

IDES

Optema™ TC 110 Blown

Ethylene Methyl Acrylate Copolymer Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Optema™ TC 110 Blown is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OPTEMA TC 110 is an ethylene methyl acrylate copolymer specifically formulated to offer extrusion and property performance for blown film applications. It produces a soft, elastic film with good handling characteristics without additional additives. It can produce film under 1.0 mil thickness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Methyl Acrylate Content
wt%
 ExxonMobil Method
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Optema™ TC 110 Blown, Optema TC 110 Blown, Optema™ , Optema, OptemaTC110Blown, TC 110 Blown, TC110, 110Blown, TC110Blown, Ethylene Methyl Acrylate Copolymer, EMA, Thermoplastic Elastomer, TPE, ExxonMobil, EthyleneMethylAcrylateCopolymer, ThermoplasticElastomer, 110TC
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.