IDES Prospector Already have an account? Login Here

IDES

Bexloy® AXW507NC010

Ionomer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Bexloy® AXW507NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DuPont™ Bexloy®AXW507NC010 is a modified ionomer resin engineered for injection molded exterior automotive applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Uses 
  • Automotive Exterior Parts
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 73°F)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break, 73°F)
%
 ASTM D638, ISO 527-2
Flexural Modulus (73°F)
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength (73°F)
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F)
ft·lb/in
 ASTM D256
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow (-22 to 176°F)
in/in/°F
 ASTM D696
Additional Information
Heat Sag, ASTM D3769: 0.5 in
Heat Sag, ASTM D3769, 82°C: 13 mm
Rheometric Impact, 23°C, 8 kph, 12.5 mm dia tup, 75 mm dia ring: 22 J
Rheometric Impact, -30°C, 8 kph, 12.5 mm dia tup, 75 mm dia ring: 18 J
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bexloy® AXW507NC010, Bexloy AXW507NC010, Bexloy® , Bexloy, BexloyAXW507NC010, AXW 507 NC 010, AXW507NC010, AXW507, 507NC, NC010, Ionomer, DuPont P&IP, 507AXW
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.