IDES Prospector Already have an account? Login Here

IDES

API PS 550-HF

High Impact Polystyrene

Supplied by American Polymers, Inc.

The technical datasheet with complete property values for API PS 550-HF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
API 550-HF is a high impact grade of polystyrene. It is characterized by good impact and processability. API 550-HF offers good retention of mechanical properties in applications with long flow length requirements.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Features 
  • Good Processability
  • High Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (L-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: API PS 550-HF, API PS 550HF, API PS , APIPS550HF, APIPS, PS 550 HF, PS 550, 550, PS550-HF, PS550HF, PS550:HF, PS550/HF, PS550+HF, PS550_HF, PS550 HF, PS550, 550-HF, 550HF, 550:HF, 550/HF, 550+HF, 550_HF, 550 HF, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, American Poly, PolystyreneHighImpact, PSHIPS, HF550, 550PS
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.