IDES Prospector Already have an account? Login Here

IDES

Taitalac® 6000F

Acrylonitrile Butadiene Styrene

Supplied by Taita Chemical Company, Ltd.

The technical datasheet with complete property values for Taitalac® 6000F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Excellent Printability
  • Good Toughness
  • High Melt Stability
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
200°C/5.0 kg
g/10 min
  
220°C/10.0 kg
g/10 min
  
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield, 73°F, 0.125 in
psi
  
Break, 73°F, 0.125 in
psi
  
Tensile Elongation 2 (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus 3 (73°F)
psi
 ASTM D790
Flexural Strength 3 (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
73°F, 0.125 in
ft·lb/in
  
73°F, 0.500 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
UL File Number
 
  
Additional Information
Water Absorption, ASTM D570: <0.3%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Taitalac® 6000F, Taitalac 6000F, Taitalac® , Taitalac, Taitalac6000F, 6000 F, 6000F, Acrylonitrile Butadiene Styrene, ABS, Taita Chemical, AcrylonitrileButadieneStyrene, F6000
Features
Features may also be described by the following terms: Good Toughness, Tough, High Melt Stability, Excellent Printability, Printable.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
4Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.