IDES Prospector Already have an account? Login Here

IDES

Taitarex® 666

High Impact Polystyrene

Supplied by Taita Chemical Company, Ltd.

The technical datasheet with complete property values for Taitarex® 666 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Color Stability
  • Good Processability
  • High Flow
  • Ultra High Impact Resistance
  
Uses 
  • Appliances
  • Stationary Supplies
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D542
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation (Break, 73°F, 0.125 in)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256A
73°F 3
ft·lb/in
  
73°F 4
ft·lb/in
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature 5
°F
 ASTM D1525 6
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
UL File Number
 
  
Optical
Nominal Value
Unit
Test Method
Yellowness Index
YI
  
Additional Information
Nominal Value
Unit
Test Method
Residual Monomer - SM
ppm
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Taitarex® 666, Taitarex 666, Taitarex® , Taitarex, Taitarex666, 666, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, Taita Chemical, PolystyreneHighImpact, PSHIPS
Features
Features may also be described by the following terms: Ultra High Impact Resistance, High Flow, High Melt, High MFI, Good Color Stability, Good Processability, Easy Processing.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
31/4"x1/2"x5/2"
41/8"x1/2"x5/2"
53 mm thick
6Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.