IDES Prospector Already have an account? Login Here

IDES

OKITEN® 245 A

Low Density Polyethylene

Supplied by DIOKI d.d.

The technical datasheet with complete property values for OKITEN® 245 A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OKITEN® 245 A is low density polyethylene, without slip agent, intended for extrusion of general purpose blown film of high transparency and gloss.

OKITEN® 245 A is characterized by excellent processing properties and thermal stability. Extruded film has good mechanical properties.

OKITEN® 245 A is extruded in temperature range from145°C to 170°C.
Recommended film thickness: 0.025 mm to 0.060 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Heat Stabilizer
Features 
  • Food Contact Acceptable
  • Good Processability
  • Good Thermal Stability
  • Heat Stabilized
  • High Clarity
  • High Gloss
Uses 
  • Blending
  • Film
  • Foam
  • Thick-walled Parts
  
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Film Extrusion
  • Foam Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Coefficient of Friction
     ISO 8295
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Haze (0.984 mil)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OKITEN® 245 A, OKITEN 245 A, OKITEN® , OKITEN, OKITEN245A, 245 A, 245A, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Dioki, PolyethyleneLowDensity, A245
Features
Features may also be described by the following terms: High Gloss, Good Processability, Easy Processing, High Clarity, Good Thermal Stability, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3), EC (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.