IDES Prospector Already have an account? Login Here

IDES

DINALEN® 65

Low Density Polyethylene

Supplied by DIOKI d.d.

The technical datasheet with complete property values for DINALEN® 65 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DINALEN® 65 is low density polyethylene containing slip and anti-blocking additives. It is intended for thin blow film extrusion. Other processing techniques can be used in less extent.

DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C.

DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Processability
  • High Clarity
  • High Gloss
  • Opticals
  • Slip
Uses 
  • Bags
  • Blending
  • Film
  • Food Packaging
  • Thick-walled Parts
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Film Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Coefficient of Friction
     ISO 8295
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.50 mil)
 
 ASTM D2457
Haze (1.50 mil)
%
 ASTM D2457
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DINALEN® 65, DINALEN 65, DINALEN® , DINALEN, DINALEN65, 65, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Dioki, PolyethyleneLowDensity
Features
Features may also be described by the following terms: High Gloss, Good Processability, Easy Processing, High Clarity, Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock.
Uses
Uses may also be described by the following terms: Food Packaging, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3), EC (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.