IDES Prospector Already have an account? Login Here

IDES

KRATON® D1102 K

Styrene Butadiene Styrene Block Copolymer

Supplied by Kraton Polymers LLC

The technical datasheet with complete property values for KRATON® D1102 K is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Kraton D1102 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.

  • Kraton D1102 KT - supplied as a dusted porous pellet
  • Kraton D1102 KU - supplied as an undusted porous pellet

Kraton D1102 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  
Uses 
  • Adhesives
  • Coating Applications
  • Compounding
  • Footwear
  • Plastics Modification
  • Sealants
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Coating
  • Compounding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D4025
Apparent Density
g/cm³
  
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
  
Ash Content 2
%
 Internal Method
Polystyrene Content
%
 Internal Method
Solution Viscosity - Toluene, 25%wt (77°F)
Pa·s
 Internal Method
Total Extractables
%
 Internal Method
Volatile Matter
%
 Internal Method
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3 (300% Strain)
psi
 ASTM D412
Tensile Strength 3 (Yield)
psi
 ASTM D412
Tensile Elongation 3 (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 10 sec, Compression Molded)
 
 ASTM D2240
Additional Information
Nominal Value
Unit
Test Method
Antioxidant Additive 4
%
 Internal Method
Diblock Content
 
  
Styrene/Rubber ratio
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KRATON® D1102 K, KRATON D1102 K, KRATON® , KRATON, KRATOND1102K, D 1102 K, D1102 K, D1102, 1102K, D1102K, Styrene Butadiene Styrene Block Copolymer, SBS, Thermoplastic Elastomer, TPE, StyreneButadieneStyreneBlockCopolymer, ThermoplasticElastomer, 1102D
Uses
Uses may also be described by the following terms: Sanitary Products, Compounding, Compounds, Plastics Modification, Plastic Modification.
Notes
1Typical properties: these are not to be construed as specifications.
2Talc
3Measured on films cast from a solution in toluene
4Non-staining phenolic antioxidant
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.