IDES Prospector Already have an account? Login Here

IDES

PEARLTHANE® 12K85A

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLTHANE® 12K85A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLTHANE® 12K85A is a standard polyester-based TPU, supplied in form of translucent, colourless pellets, combining hardness with excellent mechanical properties. It can be easily processed by cast film and blown film extrusion..

PEARLTHANE® 12K85A is used for the extrusion of films in general and especially adhesive films, either flat or blown films.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Features 
  • Medium Hardness
Uses 
  • Adhesives
  • Cast Film
  • Film
Agency Ratings 
 
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
DIN 53479
Moisture Content 2
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Abrasion Loss
mm³
DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
    ASTM D412, DIN 53504
100% Strain
psi
 
300% Strain
psi
 
Tensile Strength
     
Yield
psi
ASTM D412
Yield
psi
DIN 53504
Tensile Elongation (Break)
%
ASTM D412, DIN 53504
Tear Strength
     
-- 3
lbf/in
ASTM D624
--
lbf/in
DIN 53515
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC) 4
°F
DIN 51007
Melting Temperature 5
°F
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® 12K85A, PEARLTHANE 12K85A, PEARLTHANE® , PEARLTHANE, PEARLTHANE12K85A, 12 K 85 A, 12K85A, 12K, K85, 85A, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, K12
Features
Features may also be described by the following terms: Medium Hardness.
Uses
Uses may also be described by the following terms: Cast Film.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Die Temperature
°F
 
Extrusion Notes
Extruder Speed: 12 to 60 rpm
Extrusion Compression Ratio: 2:1 to 3:1
Extrusion L/D Ratio: 25:1 to 30:1
Notes
1Typical properties: these are not to be construed as specifications.
2MQSA 44
3Die C
410°C/min
5Temperature at which MFI=10 g/10 min at 21.6 kg, MQSA 111
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.