PEARLTHANE 11T92EM Merquinsa Thermoplastic Polyurethane Elastomer (Polyester)

Product Description

PEARLTHANE 11T92EM is a polyester based TPU, supplied in form of translucent, colourless pellets, combining hardness with excellent mechanical properties. It can be extruded and injection-moulded.

PEARLTHANE 11T92EM can be extruded into profiles, belts, tubes and film.
In the case of injection moulding, this grade is only recommended for certain specific applications, e.g. when large, hard-to-fill mould cavities are used.

General

Material Status

Commercial: Active

Availability

Europe

North America

Features

Medium Hardness

Uses

Belts/Belt Repair

Film

Profiles

Tubing

Agency Ratings

Appearance

Translucent

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 2781
Moisture Content		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Abrasion Loss		mm³	ISO 4649
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412, ISO 37
100% Strain		psi
300% Strain		psi
Tensile Strength (Yield)		psi	ASTM D412, ISO 37
Tensile Elongation (Break)		%	ASTM D412, ISO 37
Tear Strength
--²		lbf/in	ASTM D624
--		lbf/in	ISO 34-1
Compression Set			ASTM D395
73°F, 70.0 hr		%
158°F, 24.0 hr		%
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240, ISO 868
Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature (DSC)		°F	DIN 51007
Melting Temperature		°F	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® 11T92EM, PEARLTHANE 11T92EM, PEARLTHANE® , PEARLTHANE, PEARLTHANE11T92EM, 11 T 92 EM, 11T92EM, 11T, T92, 92EM, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, T11
Features
Features may also be described by the following terms: Medium Hardness.
Uses
Uses may also be described by the following terms: Tubing, Tube, Belts/Belt Repair, Belt Repair.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Screw Speed		rpm
Screw L/D Ratio
Injection Notes
Injection Cooling Time: 30sec Injection Holding Time: 15sec Injection Time: 3sec Closing force: : 30 tons Screw diameter: : 1.02 in Maximum hydraulic pressure: : 3050 psi. Mould: : Plaque 4.7x4.7x0.08 in.
Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Die Temperature		°F
Extrusion Notes
Extruder Speed: 12 to 60rpm Extrusion Compression Ratio: 2:1 to 3:1 Extrusion L/D Ratio: 25:1 to 30:1

Notes

¹Typical properties: these are not to be construed as specifications.

²Die C

PEARLTHANE® 11T92EM

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Merquinsa