IDES Prospector Already have an account? Login Here

IDES

PEARLCOAT® 125KW

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLCOAT® 125KW is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLCOAT® 125KW is a polyester-based aromatic TPU, supplied in form of green-coloured pellets, combining hardness with excellent low-temperature flexibility. PEARLCOAT® 125KW is used in melt coatings on textile substrates for conveyor belts, obtained by sintering (in this case the product is previously ground, so as to be in powder form).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Flexibility
  • Medium Hardness
  
Uses 
  • Belts/Belt Repair
  • Coating Applications
  • Textile Applications
Agency Ratings 
Appearance 
  • Green
Forms 
  • Pellets
Processing Method 
  • Sintering
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress (Yield)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Compression Set
     ISO 815
73°F, 70.0 hr
%
  
158°F, 24.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DSC
Melting Temperature
°F
  
Additional Information
Melting Range, MQSA 111: 140 to 150°C
Abrasion Loss, DIN 53.516: 40mm³
All properties were tested in accordance with DIN test methods.
Density, DIN 53.479, 20°C: 1.23 g/cm³
Drying Temp: 90 to 100°C
Drying Time: 2 hours
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLCOAT® 125KW, PEARLCOAT 125KW, PEARLCOAT® , PEARLCOAT, PEARLCOAT125KW, 125 KW, 125KW, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, KW125
Features
Features may also be described by the following terms: Medium Hardness, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Belts/Belt Repair, Belt Repair.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.