IDES Prospector Already have an account? Login Here

IDES

PEARLBOND® 500

Thermoplastic Polyurethane Elastomer (Polycaprolactone)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLBOND® 500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLBOND® 500 is a linear, polycaprolactone-copolyester polyurethane with a high crystallization rate and a very high thermoplasticity level.
PEARLBOND® 500 is soluble in esters, ketones, xylene, toluene and chlorinated solvents.
PEARLBOND® 500 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS, in order to improve the crystallisation speed.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Crystalline
  • Solvent Resistant
  
Agency Ratings 
Appearance 
  • White
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Fill Analysis
Nominal Value
Unit
Test Method
Apparent Viscosity (266°F)
Pa·s
 ASTM D3835
Additional Information
Crystallization Rate, MQSA 12 B: 15 to 17 min
Melting Point, MQSA 70 A: 66+/-2°C
Moisture Content, MQSA 44: <0.15%
Melt Flow Index, DIN 53.735, 170 °C/ 2.16 Kg: 15 to 30 g/ 10 min
OH Value, MQSA 47A: <3mg KOH/g
Thermoplasticity, MQSA 68 A: Very high
The property Density ISO 1183 and Apparent Viscosity ASTM D3835 were tested in accordance with DIN standards. The other properties were tested in accordance with MQSA test standards.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLBOND® 500, PEARLBOND 500, PEARLBOND® , PEARLBOND, PEARLBOND500, 500, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polycaprolactone), Thermoplastic Polyurethane Elastomer Polycaprolactone, TPU-Capro, TPUCapro, TPU:Capro, TPU/Capro, TPU+Capro, TPU_Capro, TPU Capro, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolycaprolactone, ThermoplasticPolyurethane
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.