IDES Prospector Already have an account? Login Here

IDES

PEARLBOND® 125/H

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLBOND® 125/H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLBOND® 125/H is polyester - based thermoplastic polyurethane, supplied in form of colourless or slightly yellowish, translucid pellets, combining hardness with excellent lowtemperature flexibility and a low softening point. PEARLBOND® 125/H is mainly used for making heat-sealable fabrics (Thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Food Contact Acceptable
  • Good Flexibility
  • Medium Hardness
  • Soft
  
Uses 
  • Coating Applications
  • Fabrics
  • Non-specific Food Applications
Agency Ratings 
 
Appearance 
  • Translucent
  • Yellow
  
Forms 
  • Pellets
Processing Method 
  • Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (160°C/2.16 kg)
g/10 min
 ISO 1133
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Fill Analysis
Nominal Value
Unit
Test Method
Apparent Viscosity (320°F)
Pa·s
 ASTM D3835
Additional Information
Melting Range, MQSA 111: 130 to 140°C
Brookfield RVT Viscosity, (20% in THF), MQSA 55A: 300 to 400 mPa-s
Melt Flow Index, DIN 53.735, 190 °C/ 2.16 Kg: 35 to 55 g/ 10 min
The properties: Shore Hardness ISO 868, Melt Mass Flow Rate ISO 1133, Density ISO 1183 and Apparent Viscosity ASTM D3835 were tested in accordance with DIN standards. The other properties were tested in accordance with MQSA test standards.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLBOND® 125/H, PEARLBOND 125H, PEARLBOND® , PEARLBOND, PEARLBOND125H, 125, 125/H, 125H, 125:H, 125+H, 125-H, 125_H, 125 H, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, H125
Features
Features may also be described by the following terms: Medium Hardness, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.