IDES Prospector Already have an account? Login Here

IDES

PEARLBOND® 110

Thermoplastic Polyurethane Elastomer

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLBOND® 110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLBOND® 110 is a linear, aromatic polyurethane, supplied in form of white or slightly yellowish pellets, which combines a high crystallization rate with a low thermoplasticity level.
PEARLBOND® 110 is designed for the production of textile coatings for making shoestiffeners (toe puffs & counters), by extrusion process.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Aromatic
  • Crystalline
  
Uses 
  • Coating Applications
  • Footwear
  • Textile Applications
Agency Ratings 
Appearance 
  • White
  • Yellow
  
Forms 
  • Pellets
Processing Method 
  • Coating
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Additional Information
Crystallization Rate, MQSA 12A: High
Melting Range, MQSA 70 A (Kofler): 160 to 180°C
Brookfield RVT Viscosity, (15% in MEK), MQSA 40A: 6000 to 12000mPa-s
Melt Flow Index, DIN 53.735, 170 °C/ 2.16 Kg: 15 to 25g/ 10 min
Thermoplasticity, MQSA 68 A: Low
Softening Range, MQSA 70 A (Kofler): 90 - 100°C
The properties: Shore Hardness ISO 868, Melt Mass Flow Rate ISO 1133, and Density ISO 1183 were tested in accordance with DIN standards. The other properties were tested in accordance with MQSA test standards.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLBOND® 110, PEARLBOND 110, PEARLBOND® , PEARLBOND, PEARLBOND110, 110, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.