IDES Prospector Already have an account? Login Here

IDES

VALOX* 312 Resin

Polybutylene Terephthalate

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for VALOX* 312 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced, For compounding only (not for injection molding), Medium viscosity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Medium Viscosity
Uses 
  • Compounding
Processing Method 
  • Compounding Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow  3
in/in
  
Across Flow  2
in/in
  
Across Flow  3
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 4 (Yield)
psi
 ASTM D638
Tensile Elongation 4 (Break)
%
 ASTM D638
Flexural Modulus 5 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 5 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Gardner Impact 6 (73°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
CLTE - Flow
     ASTM E831
-40 to 104°F
in/in/°F
  
140 to 280°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
     ASTM D149
0.0630 in, in Oil
V/mil
  
0.126 in, in Air
V/mil
  
Dielectric Constant
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
100 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: VALOX* 312 Resin, VALOX 312 Resin, VALOX* , VALOX, VALOX312Resin, 312 Resin, 312Resin, Polybutylene Terephthalate, PBT, Polyester, SABIC IP Asia, PolybutyleneTerephthalate, Resin312
Features
Features may also be described by the following terms: Medium Viscosity.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 8 hrs
Water Bath Temperature: 25 - 35 °C
Notes
1Typical properties: these are not to be construed as specifications.
20.75 to 2.3 mm
32.3 to 4.6 mm
4Type I, 2.0 in/min
50.051 in/min
6Modified
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.