IDES Prospector Already have an account? Login Here

IDES

CYCOLOY* CH6410 Resin

Acrylonitrile Butadiene Styrene + PC

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for CYCOLOY* CH6410 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CH6410 is a high heat, impact modified PC resin, with nonbrominated, nonchlorinated flame retardant system. Limited colors only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Flame Retardant
  • Impact Modifier
  
Features 
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Impact Modified
  
Appearance 
  • Colors Available
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
     Internal Method
-- 2
in/in
  
0.126 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break 4
psi
 ASTM D638
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 5
psi
 ASTM D790
-- 6
psi
 ISO 178
Flexural Strength
      
-- 6, 7
psi
 ISO 178
Yield, 1.97 in Span 5
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
32°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 3.94 in Span 10
°F
 ISO 75-2/Be
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 3.94 in Span 10
°F
 ISO 75-2/Ae
Vicat Softening Temperature
      
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test (257°F)
 
 IEC 60695-10-2
CLTE
      
Flow: -40 to 104°F
in/in/°F
 ASTM E831
Flow: 73 to 140°F
in/in/°F
 ISO 11359-2
Transverse: -40 to 104°F
in/in/°F
 ASTM E831
Transverse: 73 to 140°F
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
50 Hz
 
  
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
50 Hz
 
  
60 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.126 in, in Oil)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0390 in
 
  
0.0590 in
 
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, Cycloy

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* CH6410 Resin, CYCOLOY CH6410 Resin, CYCOLOY* , CYCOLOY, CYCOLOYCH6410Resin, CH 6410 Resin, CH6410 Resin, CH6410, 6410Resin, CH6410Resin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 6410CH
Features
Features may also be described by the following terms: Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
32.0 in/min
4Type I, 2.0 in/min
50.051 in/min
60.079 in/min
7Yield
880*10*4 sp=62mm
980*10*4
10120*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.