IDES Prospector Already have an account? Login Here

IDES

CYCOLAC* FR23 Resin

Acrylonitrile Butadiene Styrene

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for CYCOLAC* FR23 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Flame retardant ABS (non-PBBE additives). Good properties/toughness. Excellent moldability. UL94 V-0 rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Good Moldability
  • Good Toughness
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)      
230°C/3.8 kg
g/10 min
 ASTM D1238
220°C/5.0 kg
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 3     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 3     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 4 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 4 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
CLTE     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL     UL 94
0.0910 in
 
  
0.0980 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (392°F, 1000 sec^-1)
Pa·s
 ASTM D3835
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, Cyclac

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLAC* FR23 Resin, CYCOLAC FR23 Resin, CYCOLAC* , CYCOLAC, CYCOLACFR23Resin, FR 23 Resin, FR23 Resin, FR23, 23Resin, FR23Resin, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrene, 23FR
Features
Features may also be described by the following terms: Good Moldability, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
40.051 in/min
5Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.