IDES Prospector Already have an account? Login Here

IDES

NORYL PPX* PPX640 Resin

Polyphenylene Ether + PS + PP

Glass Fiber Reinforcement, 40%

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for NORYL PPX* PPX640 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
40% GR PPE+PP. High elongation. high stiffness. NSF Standard 61 Compliant (color limited).
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • High Elongation
  • High Stiffness
  
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 3 (Break, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Instrumented Dart Impact
     ASTM D3763
-22°F, Total Energy
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
CLTE
     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL PPX* PPX640 Resin, NORYL PPX PPX640 Resin, NORYL PPX* , NORYL PPX, NORYLPPXPPX640Resin, NORYLPPX, PPX 640 Resin, PPX640 Resin, PPX640, 640Resin, PPX640Resin, Polyphenylene Ether + PS + PP, Polyphenylene Ether PS PP, Polyphenylene Ether : PS : PP, Polyphenylene Ether / PS / PP, Polyphenylene Ether - PS - PP, Polyphenylene Ether _ PS _ PP, Polyphenylene Ether PS PP, PPE+PS+PP, PPEPSPP, PPE:PS:PP, PPE/PS/PP, PPE-PS-PP, PPE_PS_PP, PPE PS PP, Polyphenylene Ether, PPE, SABIC IP Asia, PolyphenyleneEtherPSPP, PolyphenyleneEther, PolyphenyleneEther_PS_PP, 640PPX
Features
Features may also be described by the following terms: High Stiffness, High Elongation.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): NSF (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
30.051 in/min
4Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.