IDES Prospector Already have an account? Login Here

IDES

GELOY* XTPM309E Resin

Acrylonitrile Styrene Acrylate + PC

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for GELOY* XTPM309E Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
XTPM309E is a high heat resistant ASA+PC. It shows high impact retention, which can be positioned for various outdoor and indoor applications requiring superior heat aging properties and colour stability.Typical properties measured on natural material.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Color Stability
  • Good Heat Aging Resistance
  • High Heat Resistance
  • High Impact Resistance
  
Uses 
  • Outdoor Applications
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR)
     ISO 1133
220°C/10.0 kg
in³/10min
  
240°C/5.0 kg
in³/10min
  
260°C/5.0 kg
in³/10min
  
Molding Shrinkage - Flow 2
in/in
 Internal Method
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield 5
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Yield
psi
 ISO 527-2/50
Break 4
psi
 ASTM D638
Break 5
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield 5
%
 ASTM D638
Yield
%
 ISO 527-2/5
Yield
%
 ISO 527-2/50
Break 4
%
 ASTM D638
Break 5
%
 ASTM D638
Break
%
 ISO 527-2/5, ISO 527-2/50
Flexural Modulus 6
psi
 ISO 178
Flexural Strength 6, 7
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
-4°F
ft·lb/in
 ASTM D256
14°F
ft·lb/in
 ASTM D256
32°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
-4°F 9
ft·lb/in²
 ISO 180/1A
14°F 9
ft·lb/in²
 ISO 180/1A
32°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Multi-Axial Instrumented Impact Energy
ft·lb
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 10
      
66 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Ae
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test
     IEC 60695-10-2
257°F
 
  
266°F 11
 
  
CLTE
     ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.0630 in, in Oil)
V/mil
 ASTM D149
Dissipation Factor (1 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index (0.126 in)
°F
 IEC 60695-2-12
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* XTPM309E Resin, GELOY XTPM309E Resin, GELOY* , GELOY, GELOYXTPM309EResin, XTPM 309 E Resin, XTPM309E Resin, XTPM309, 309E, EResin, XTPM309EResin, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 309XTPM
Features
Features may also be described by the following terms: Good Color Stability, High Impact Resistance, High Heat Resistance, Good Heat Aging Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.20 in/min
4Type I, 0.20 in/min
5Type I, 2.0 in/min
60.079 in/min
7Yield
880*10*4 sp=62mm
980*10*4
10120*10*4 mm
11Approximate maximum
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.