Braskem PE CF-800 Braskem Polyethylene, Linear Low Density

Product Description

CF-800 is a LLDPE Hexene copolymer produced by Braskem. Its special additive package achieve a stable CoF film. It is already compounded with 30% of LDPE avoiding the end use need of blending. Very low gel amount.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Latin America

North America

South America

Additive

Medium Antiblock

Medium Slip

Features

Copolymer

Low Density

Low Gel

Medium Antiblocking

Medium Slip

Uses

Bags

Laminates

Agency Ratings

Forms

Pellets

Processing Method

Extrusion Blow Molding

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (Blown Film)			ASTM D1894
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Film Thickness - Recommended / Available
Secant Modulus			ASTM D882
MD: 1.6 mil, Blown Film		psi
TD: 1.6 mil, Blown Film		psi
Tensile Strength			ASTM D882
MD: Break, 1.6 mil, Blown Film		psi
TD: Break, 1.6 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil, Blown Film		%
TD: Break, 1.6 mil, Blown Film		%
Dart Drop Impact² (1.6 mil, Blown Film)		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD: 1.6 mil		g
TD: 1.6 mil		g
Optical	Nominal Value	Unit	Test Method
Gloss (45°)			ASTM D2457
Haze		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE CF-800, Braskem PE CF800, Braskem PE , BraskemPECF800, BraskemPE, CF, PECF-800, PECF800, PECF:800, PECF/800, PECF+800, PECF_800, PECF 800, PECF, CF-800, CF800, CF:800, CF/800, CF+800, CF_800, CF 800, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Braskem, PolyethyleneLinearLowDensity, 800CF, 800PECF
Features
Features may also be described by the following terms: Low Gel, Low Density, Low Specific Gravity, Medium Slip, Medium Antiblocking, Medium Antiblock.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion Notes
Blown Film Temperature profile: 180 to 210°C Blow up ratio: 2 to 3:1 Die gap: 1.8 to 2.5 mm Screen package: 40/60/40 blend Mass temperature: 230 °C Frost line height: 7 to 9 times the die diameter

Notes

¹Typical properties: these are not to be construed as specifications.

²F50

Braskem PE CF-800

Linear Low Density Polyethylene

Supplied by Braskem