IDES Prospector Already have an account? Login Here

IDES

Braskem PE ES 300

High Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Braskem PE ES 300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ES 300 is a High Density Polyethylene, high molecular weight, bimodal copolymer, film extrusion resin, in accordance with the highest international quality standards. The Processing Characteristics and Properties are: excellent balance between processing characteristics and physical properties, high resistance to tear and dart drop, low permeability to gases and moisture.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Copolymer
  • Good Tear Strength
  • High Molecular Weight
  • Low Gas Permeability
  
Uses 
  • Bags
  • Film
  • Food Packaging
  • Food Wrap
  
Forms 
  • Pellets
Processing Method 
  • Extrusion Blow Molding
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (Compression Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Additional Information
Molecular weight distribution, No standard: Bimodal
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE ES 300, Braskem PE , BraskemPEES300, BraskemPE, PEES 300, PE, PEES300, ES 300, ES300, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Braskem, PolyethyleneHighDensity, 300ES, 300PEES
Features
Features may also be described by the following terms: High Molecular Weight, High MW, Good Tear Strength, Low Gas Permeability.
Uses
Uses may also be described by the following terms: Food Packaging, Food Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.