IDES Prospector Already have an account? Login Here

IDES

ChronoFlex® C 80A

Polyurethane

Supplied by CardioTech International, Inc.

The technical datasheet with complete property values for ChronoFlex® C 80A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Aromatic
  • Solvent Resistant
  
Uses 
  • Medical/Healthcare Applications
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)
g/10 min
 ASTM D1238
Water Absorption (Equilibrium)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ASTM D638
100% Secant: 73°F
psi
  
300% Secant: 73°F
psi
  
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Coefficient of Friction (vs. Itself - Dynamic)
 
 ASTM D1894
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Yield)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Additional Information
Ultimate Tensile Strength, ASTM D638, 73 °F: 5500 to 6500 psi
Ultimate Tensile Strain, ASTM D638, 73 °F: 400 to 490 %
100% Secant Modulus, ASTM D638, 73 °F: 770 to 1250 psi
300% Secant Modulus, ASTM D638, 73 °F: 700 to 1400 psi
Abrasion Resistance, ASTM D1044, 1000 cycles: 0.008%
Recommended Sterilization Method, No standard: Gamma
Class VI Biocompactibility Test, USP XXII: Pass
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ChronoFlex® C 80A, ChronoFlex C 80A, ChronoFlex® , ChronoFlex, ChronoFlexC80A, C 80 A, C 80A, C80, 80A, C80A, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, CardioTech, PolyurethaneUnspecified, PURUnspecified, 80C
Uses
Uses may also be described by the following terms: Medical Applications.
Extrusion
Nominal Value
Unit
 
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.