IDES Prospector Already have an account? Login Here

IDES

ChronoFlex® C 75D

Polyurethane

Supplied by CardioTech International, Inc.

The technical datasheet with complete property values for ChronoFlex® C 75D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Aromatic
  • Solvent Resistant
  
Uses 
  • Medical/Healthcare Applications
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)
g/10 min
 ASTM D1238
Water Absorption (Equilibrium)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ASTM D638
100% Secant: 73°F
psi
  
300% Secant: 73°F
psi
  
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Coefficient of Friction (vs. Itself - Dynamic)
 
 ASTM D1894
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
 ASTM D412
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Yield)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Additional Information
Ultimate Tensile Strength, ASTM D638, 73 °F: 7000 to 8000 psi
Ultimate Tensile Strain, ASTM D638, 73 °F: 255 to 320 %
100% Secant Modulus, ASTM D638, 73 °F: 5300 to 5700 psi
300% Secant Modulus, ASTM D638, 73 °F: 2700 to 3200 psi
Abrasion Resistance, ASTM D1044, 1000 cycles: 0.053%
Recommended Sterilization Method, No standard: Ethylene oxide
Class VI Biocompactibility Test, USP XXII: Pass
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ChronoFlex® C 75D, ChronoFlex C 75D, ChronoFlex® , ChronoFlex, ChronoFlexC75D, C 75 D, C 75D, C75, 75D, C75D, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, CardioTech, PolyurethaneUnspecified, PURUnspecified, 75C
Uses
Uses may also be described by the following terms: Medical Applications.
Extrusion
Nominal Value
Unit
 
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.