IDES Prospector Already have an account? Login Here

IDES

Marlex® TPO CPD-700

Polyolefin

Talc Filler

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® TPO CPD-700 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler
Features 
  • High Flow
  • High Stiffness
  
Uses 
  • Engineered Applications
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Flexural Modulus - Tangent 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, Injection Molded
ft·lb/in
  
73°F, Injection Molded
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, Injection Molded
°F
  
264 psi, Unannealed, Injection Molded
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® TPO CPD-700, Marlex TPO CPD700, Marlex® TPO , Marlex TPO, MarlexTPOCPD700, MarlexTPO, CPD, TPOCPD-700, TPOCPD700, TPOCPD:700, TPOCPD/700, TPOCPD+700, TPOCPD_700, TPOCPD 700, TPOCPD, CPD-700, CPD700, CPD:700, CPD/700, CPD+700, CPD_700, CPD 700, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Phillips Sumika, PolyolefinUnspecified, 700CPD, 700TPOCPD
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.51 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.