IDES Prospector Already have an account? Login Here

IDES

Zeotherm® 100-70B

Thermoplastic Vulcanizate

Supplied by Zeon Chemicals L.P.

The technical datasheet with complete property values for Zeotherm® 100-70B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A high-performance thermoplastic vulcanizate (TPV) designed to survive long-term exposure to 150°C (300°F) air and oil. Ideal for automotive and industrial applications where there is exposure to heat and/or oil.

TPV based on polyacrylate elastomer dynamically vulcanized in a matrix of polyamide (nylon) plastic.

  • Excellent heat resistance (sustained at 150°C / 300°F; spikes to 175°C / 350°F).
  • Excellent resistance to many mineral + synthetic motor oils, transmission fluids, and greases.
  • Low temperature performance to -40°C.
  • Lowest durometer in Zeotherm 100-series TPV family.
  • Bondable to polyamides via overmolding (insert and 2-shot).
  • Optimized for thermoplastic injection molding processing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Bondability
  • Good Chemical Resistance
  • Grease Resistant
  • High Heat Resistance
  • Oil Resistant
  • Recyclable Material
Uses 
  • Automotive Applications
  • Industrial Applications
  
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >ACM+PA6<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
 ASTM D412
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Compression Set (257°F, 70.0 hr)
%
 ASTM D395B
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 15 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (302°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air (302°F, 168 hr)
%
 ASTM D573
Change in Durometer Hardness in Air (Shore A, 302°F, 168 hr)
 
 ASTM D573
Change in Tensile Strength (302°F, 168 hr, in SF105 Oil)
%
 ASTM D471
Change in Ultimate Elongation (302°F, 168 hr, in SF105 Oil)
%
 ASTM D471
Change in Durometer Hardness (Shore A, 302°F, 168 hr, in SF105 Oil)
 
 ASTM D471
Change in Volume (302°F, 168 hr, in SF105 Oil)
%
 ASTM D471
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Additional Information
Low Temperature Gehman, ASTM D1053, T10: -35°C
Low Temperature Gehman, ASTM D1053, T100: -50°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zeotherm® 100-70B, Zeotherm 10070B, Zeotherm® , Zeotherm, Zeotherm10070B, 100, 100 70 B, 100-70B, 10070B, 100:70B, 100/70B, 100+70B, 100_70B, 100 70B, 10070, 70B, Thermoplastic Vulcanizate, TPV, Thermoplastic Elastomer, TPE, Zeon, ThermoplasticVulcanizate, ThermoplasticElastomer, 70100
Features
Features may also be described by the following terms: High Heat Resistance, Good Chemical Resistance, Chemical Resistant, Bondability, Bondable.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): SAE (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.