IDES Prospector Already have an account? Login Here

IDES

Advanced Composites BJ4H-CS BDX

Polypropylene

Supplied by Advanced Composites, Inc.

The technical datasheet with complete property values for Advanced Composites BJ4H-CS BDX is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Impact Resistance
  • Pleasing Surface Appearance
  
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.118 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-20°F
ft·lb/in
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Advanced Composites BJ4H-CS BDX, Advanced Composites BJ4HCS BDX, Advanced Composites , AdvancedCompositesBJ4HCSBDX, AdvancedComposites, BJ 4 H, CompositesBJ 4 H CS BDX, CompositesBJ 4 H, BJ4H, CompositesBJ4H-CS BDX, CompositesBJ4HCS BDX, CompositesBJ4H:CS BDX, CompositesBJ4H/CS BDX, CompositesBJ4H+CS BDX, CompositesBJ4H_CS BDX, CompositesBJ4H CS BDX, CompositesBJ4, CompositesBJ4H, BJ 4 H CS BDX, CompositesBJ4HCSBDX, BJ4H-CS BDX, BJ4HCS BDX, BJ4H:CS BDX, BJ4H/CS BDX, BJ4H+CS BDX, BJ4H_CS BDX, BJ4H CS BDX, BJ4, 4H, HCS, CSBDX, CompositesBJ4H_CSBDX, BJ4HCSBDX, BJ4H_CSBDX, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Adv Composites, PolypropyleneUnspecified, PPUnspecified, 4BJ, 4CompositesBJ
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Impact Resistance, Pleasing Surface Appearance.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Cushion
in
  
Injection Notes
Injection Pressure: 20 to 60% of machine capacity
Screw RPM: 1 to 2 secs before mold open
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.