IDES Prospector Already have an account? Login Here

IDES

AFFINITY™ SL 8110G

Polyolefin Plastomer

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for AFFINITY™ SL 8110G is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AFFINITY™ SL 8110G Polyolefin Plastomer is a resin produced using INSITE™ Technology.

AFFINITY SL 8110G Polyolefin Plastomer has been designed for blown stretch films as a skin layer in coextrusion with other resins. It exhibits excellent stretchability and cling properties as well as good physical properties.
Due to its low melting point, AFFINITY SL 8110G is well suited for applications in batch inclusion bag applications.

Applications:
  • Cling layer in blown stretch and preoriented films.
  • Batch inclusion bags.

Complies with:
  • U.S. FDA FCN 424
Consult the regulation for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Puncture Energy (0.79 mil)
in·lb
 ASTM D5748
Film Puncture Force (0.79 mil)
lbf
 ASTM D5748
Tensile Stress
     ISO 527-3
MD: Break, 0.79 mil
psi
  
TD: Break, 0.79 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 0.79 mil
%
  
TD: Break, 0.79 mil
%
  
Dart Drop Impact (0.79 mil)
g
 ISO 7765-1/A
Unstretched Cling
g
 ASTM D5458
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.787 mil)
 
 ASTM D2457
Haze (0.787 mil)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AFFINITY™ SL 8110G, AFFINITY SL 8110G, AFFINITY™ , AFFINITY, AFFINITYSL8110G, SL 8110 G, SL 8110G, SL8110, 8110G, SL8110G, Plastomer, Polyolefin, Plastomer Polyolefin, POP, Thermoplastic Elastomer, TPE, Dow, PlastomerPolyolefin, ThermoplasticElastomer, 8110SL
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Fabrication Conditions For Blown Film:
  • Screw Size: 45 mm
  • Die Gap: 1.5 mm
  • Melt Temperature: 210 °C
  • Output: 15
  • Blow-up Ratio: 2.5
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.