IDES Prospector Already have an account? Login Here

IDES

Borealis PP BE50-7032

Polypropylene Homopolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis PP BE50-7032 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BE50-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer characterised by high stiffness, high heat distortion temperature and high resistance to thermal ageing.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Heat Aging Resistance
  • High Heat Resistance
  • High Molecular Weight
  • High Stiffness
  • Homopolymer
  • Low Flow
Uses 
  • Fittings
  • Piping
  • Rods
  • Sheet
  
Appearance 
  • Grey
Forms 
  • Pellets
Processing Method 
  • Compression Molding
  • Extrusion
  • Pipe Extrusion
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/5.0 kg
g/10 min
  
230°C/2.16 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BE50-7032, Borealis PP BE507032, Borealis PP , BorealisPPBE507032, BorealisPP, BE 50, PPBE 50 7032, PPBE 50, PPBE50-7032, PPBE507032, PPBE50:7032, PPBE50/7032, PPBE50+7032, PPBE50_7032, PPBE50 7032, PPBE50, BE 50 7032, BE50-7032, BE507032, BE50:7032, BE50/7032, BE50+7032, BE50_7032, BE50 7032, BE50, 507032, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Borealis, PolypropyleneHomopolymer, PPHomopolymer, 50BE, 50PPBE
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, High Stiffness, High Molecular Weight, High MW, High Heat Resistance, Good Heat Aging Resistance.
Uses
Uses may also be described by the following terms: Rods, Rod, Piping, Pipe.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Head Temperature: 200 to 230°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.