IDES Prospector Already have an account? Login Here

IDES

Bormed™ HD850MO

Polypropylene Homopolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ HD850MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed HD850MO is a medium melt-flow-rate polypropylene homopolymer prepared by Borealis Nucleation Technology (BNT). This grade has exceptional dimensional stability and its high crystallization temperature allows for the reduction of cycle time. This polymer grade is intended for production of medical and medical-related articles.

Products from this grade are characterized by excellent clarity and balanced stiffness/impact properties. Due to its high heat deflection temperature, products made from this grade can be steam sterilized (121°C for 20 min).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Nucleating Agent
Features 
  • Fast Molding Cycle
  • Good Dimensional Stability
  • Good Impact Resistance
  • Good Stiffness
  • High Clarity
  • High Heat Resistance
  • Homopolymer
  • Nucleated
  • Steam Sterilizable
Uses 
  • Caps
  • Closures
  • Medical/Healthcare Applications
  • Pharmaceutical Packaging
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ HD850MO, Bormed HD850MO, Bormed™ , Bormed, BormedHD850MO, HD 850 MO, HD850MO, HD850, 850MO, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Borealis, PolypropyleneHomopolymer, PPHomopolymer, 850HD
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Clarity, Good Stiffness, Good Impact Resistance, Steam Sterilization, Steam Sterilizable, High Heat Resistance.
Uses
Uses may also be described by the following terms: Medical Applications, Pharmaceutical Packaging, Closure Caps, Caps, Cap.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.