IDES Prospector Already have an account? Login Here

IDES

Bormed™ HE2581-PH

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ HE2581-PH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed HE2581-PH is a high density polyethylene intended for blow moulding products with high stiffness and very good environmental stress crack resistance (ESCR) Products from this grade can be produced by both IBM and ISBM.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High ESCR (Stress Crack Resist.)
  • High Stiffness
  
Uses 
  • Bottles
  • Containers
  • Medical/Healthcare Applications
  • Pharmaceutical Packaging
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (10% Antarox, F50)
hr
 ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ HE2581-PH, Bormed HE2581PH, Bormed™ , Bormed, BormedHE2581PH, HE 2581, HE 2581 PH, HE2581-PH, HE2581PH, HE2581:PH, HE2581/PH, HE2581+PH, HE2581_PH, HE2581 PH, HE2581, 2581PH, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 2581HE
Features
Features may also be described by the following terms: High Stiffness, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Pharmaceutical Packaging, Medical Applications.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.