IDES Prospector Already have an account? Login Here

IDES

Bormed™ HE9621-PH

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ HE9621-PH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed HE9621-PH is a natural high-density polyethylene with a narrow molecular weight distribution, which is produced in a low-pressure gas-phase process. This grade is designed for the injection moulding of articles which require good rigidity, good flow properties and low warpage.

Products from this grade can be sterilized with ethylene oxide or with radiation up to 35 kGy.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Ethylene Oxide Sterilizable
  • Good Flow
  • Low Warpage
  • Medium Rigidity
  • Narrow Molecular Weight Distribution
  • Radiation Sterilizable
  • Recyclable Material
Uses 
  • Caps
  • Closures
  • Hypodermic Syringe Parts
  • Pharmaceutical Packaging
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ HE9621-PH, Bormed HE9621PH, Bormed™ , Bormed, BormedHE9621PH, HE 9621, HE 9621 PH, HE9621-PH, HE9621PH, HE9621:PH, HE9621/PH, HE9621+PH, HE9621_PH, HE9621 PH, HE9621, 9621PH, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 9621HE
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Medium Rigidity, Good Rigidity, Good Flow, Low Warpage, Low Warp, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Pharmaceutical Packaging.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Holding pressure: as low as possible
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.