IDES Prospector Already have an account? Login Here

IDES

Bormed™ HF840MO

Polypropylene Homopolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ HF840MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed HF840MO is a polypropylene homopolymer intended for injection moulding. This grade is modified with internal lubricant for products requiring a low surface friction. and is characterized by easy processability, high transparency, controlled low friction, good physical properties, good printability and easy demoulding. In addition it can be sterilized with ethylene oxide or steam and has an excellent chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Lubricant
Features 
  • Ethylene Oxide Sterilizable
  • Excellent Printability
  • Good Chemical Resistance
  • Good Mold Release
  • Good Processability
  • High Clarity
  • High Gloss
  • Homopolymer
  • Low Friction
  • Lubricated
  • Recyclable Material
  • Steam Sterilizable
Uses 
  • Hypodermic Syringe Parts
  • Medical/Healthcare Applications
  • Valves/Valve Parts
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ HF840MO, Bormed HF840MO, Bormed™ , Bormed, BormedHF840MO, HF 840 MO, HF840MO, HF840, 840MO, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Borealis, PolypropyleneHomopolymer, PPHomopolymer, 840HF
Features
Features may also be described by the following terms: Low Friction, Good Processability, Easy Processing, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Steam Sterilization, Steam Sterilizable, Good Chemical Resistance, Chemical Resistant, Excellent Printability, Printable, High Clarity, High Gloss, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Medical Applications, Valves, Valve Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.